Lamella Clarifier System For Wastewater Clarifying Sludge Separator Recessed Ramp

The lamella clarifier system tank is a new type of high-efficiency sedimentation device developed on the basis of ordinary sloping plate sedimentation. It is a kind of solid-liquid separation equipment with advanced technical performance, which is mainly used as the primary sedimentation tank. When the sewage treatment plant is limited by the floor space, the existing sewage treatment plant taps the potential or expands the treatment capacity.

The wastewater enters the pool from the inlet pipe and flows down through the middle water inlet chamber, it is reflected by the deflector plate, and then enters the tilt plate through the inlet water distribution.As the wastewater flows upward, the solid particles are settled on the parallel tilt plates assembly, and then slide into the sludge hopper at the bottom of the sediment hopper.The clarified liquid exits the tilt plate and water collecting channel by top water outlet road, then gathering into outlet sink via its adjustable weir plates. The water outlet tube in the tank will discharge the water outside.In the sludge hopper, the sludge is concentrated and discharged through the sludge outlet.

1. Small footprint. Only 1/5 of the length of the horizontal flow sedimentation tank, but improve the sedimentation efficiency by 3-5 times.

3. Adopt inclined plate sedimentation, no blockage in inclined pipe.

1. New structure design. Double sedimentation area, greatly improve the sedimentation capacity;

3. Good sedimentation effect. Inclined plate sedimentation creates laminar flow conditions; 5. Stably discharged sewage, and no sludge coverage;

8. Less power, energy saving.